If you cannot find the YM wifi network when trying to set up your zWeatherstation-500W please try the following steps.
1. Take out the battery, make sure the on/off switch on the right side is turned on then plug in the power and wait two minutes.
2. Press the reset button (above the on/off switch on the right) for 15 seconds and wait two minutes.
3.Turn the camera on/off switch to off and then back on, wait two minutes, check the red led on the back of the camera it should be blinking letting you know the unit is transmitting wifi.
4. Turn on your smartphone's wifi in the phones settings the same way you would connect to your home wifi and scan for networks now, you should find the YM network and be able to connect to it.